建筑施工電梯加工棚的鋼材選擇
來源：http://sud-inc.com/ 發布時間：2021-11-29
建筑施工電梯加工棚的選擇是鋼材，也就是我們說的鋼筋，才用的是雙層防砸結構。
Construction of the elevator processing shed is the choice of steel, that is, we said the reinforcement, only the use of double-layer anti-smashing structure.
Construction of the elevator processing shed is the choice of steel, that is, we said the reinforcement, only the use of double-layer anti-smashing structure.
加工棚是由單一成品裝配而成，用于建造電梯通道，采用全封閉防護，防護性能高，采用雙層防護硬硬鋼構板可有效緩沖高空跌落的沖擊力，設置三面防護網隔離工人從電梯側面險象環生，用國標鋼材制作牢固耐用；
The processing shed is assembled from a single finished product and is used for building elevator passages. It is fully enclosed and has high safety and protection performance. The hard steel structure plate with double-layer protection can effectively cushion the impact of falling from height, set up a three-side protective net to isolate workers from the side of the elevator dangerous, with the National Standard Steel Production Firm and durable;
戶外涂料采用360度自動烤漆，色彩鮮艷，不易褪色；
Outdoor paint with 360 degrees automatic paint, bright color, not fade;
Outdoor paint with 360 degrees automatic paint, bright color, not fade;
警告腳線和標識字采用了全新的數控墨水印刷工藝，更整齊、美觀、醒目；
warning foot line and logo using a new digital ink printing process, more neat, beautiful, eye-catching;
warning foot line and logo using a new digital ink printing process, more neat, beautiful, eye-catching;
樣式，顏色，大小多樣，可根據客戶需求定做；
style, color, size, can be customized according to customer needs;
style, color, size, can be customized according to customer needs;
雙防砸結構，標準化設計，全組合，快速組裝，拆裝簡便，便于運輸；
Double smash-proof structure, standardized design, full combination, quick assembly, easy disassembly and transportation;
加工棚是在施工現場對鋼筋進行拉直、彎曲、焊接等鋼筋加工的場所。普遍性的木工棚子的長和寬將根據加工鋼筋的數量和所用機器的數量來確定加工棚的大小，一般情況有6*12 m、9*12 m、18*30 m等，可以根據需要。
The processing shed is in the construction site to carry on the straight, the bending, the welding and so on reinforcement processing place. The length and width of the universal woodworking shed will be determined according to the number of rebars processed and the number of machines used to determine the size of the shed, usually 6 * 12m, 9 * 12m, 18 * 30m, and so on, as required.
工程實際情況，自行設計長度和寬度尺寸。木工加工棚工作臺的布置也要合理，根據實際鋼筋加工流程，還有加工前期原料鋼筋及加工結束后的成品存放，所以地面要在施工場地上30 cm以上，防止雨水浸泡，用腳在放置手管時，應采用橫桿和斜撐，以確保加工棚的穩定。
Engineering practice, self-designed length and width dimensions. The layout of the worktable of the woodworking shed should also be reasonable. According to the actual reinforcement processing flow, there are also pre-processing raw reinforcement and finished products stored after processing. Therefore, the ground should be over 30 cm above the construction site to prevent the rain from soaking, when placing hand tubes with feet, cross bar and diagonal bracing shall be used to ensure the stability of the processing shed.
魯公網安備
37018102000522號